众文网1.急求一篇土木工程毕业论文英文文献及翻译,不少于3000个单词
Research on the construction safety management of Civil Engineering In recent years, the construction accident in civil engineering in our country often occur. This not only caused casualties, also caused great loss of national property, and resulting in a very bad social influence. Therefore, in our country, the construction units in the civil engineering construction projects, shouldstrengthen the construction safety management, all aspects ofsecurity control for engineering, to prevent dangerous accidentsin the end it all. The cause of the civil engineering constructionaccidents are in many aspects. In order to enhance security,should be combined with the characteristics of construction projects and the enterprise's internal and external conditions, the rational allocation of production factors, optimization of management process. In order to realize the construction safetymanagement, construction units should establish a safety management system of a project, it should be carried out from the following aspects:A construction safety consciousness, cultivate the modern safety science theory, occurrence of unsafe human behavior causedcasualties. To implement safety management, it should becombined with psychology, behavioral science to strengthen the education and training of employees in production safety,improve the consciousness of safe production, so as to guide the safety production behavior of employees. For the construction enterprises should strengthen safety awareness and educationproject personnel, developing the regular safety education to the construction personnel involved in the project, and to carry outsecurity work. Three level education to the new participate in the work of the operating personnel; often transform types of employees, should be safety training for new types of work, makeoperation personnel matters needing attention can be familiar with the safe operation of the. In order to make safe win support among the people, enterprisemanagement personnel but also in engineering project, using a variety of promotional tools to start a variety of education,cultivate the construction personnel safety consciousness. Andin the management of enterprises, the production safety systemthought to. Leaders at all levels and enterprises in issuing the project production task, should also carry out safety productionmeasures. Such as the production safety requirements to the construction personnel, so conducive to safe thought into the production of management, let each employee has consciously in the psychological sense of security.Two, the establishment of management system for safety in production in addition to strengthen production safety education and awareness of construction project staff, should alsoestablish a safety management system, protect the system from the construction enterprise safety in production of. In order toavoid the frequent occurrence of sudden accident, the construction enterprise should according to the project, to develop a comprehensive, the system of safety management,and invest the necessary manpower and funds to ensure the implementation of the project. Ensure the production safetyconstruction from the system implementation, the project section of construction enterprises should establish the safety inspectionsystem, and regularly to the project construction of the security check. Make a clear record of project construction process,record the dangerous post, and regularly check the work. Self evaluation and construction team every week to organize asafety activities, the project department to make regular safetyevaluation for project production. Construction enterprises in theconstruction of civil engineering, in order to establish a safety management system, need to make corresponding technical measures for safety management system, a standard for project.Therefore, the safety work of construction enterprise project technical measures should be prior to commencement of works.As for engineering and technical measures should be strict examination and approval, the approval before implementation. If the design changes during construction, corresponding safety technical measures should be coordinated with the adjustment,will follow. The safety technical measures enacted personnel andparticipation, should fully understand the project as the construction scheme, construction environment, the actualoperation has, and combined with relevant laws and regulations or the security policy to establish safety technical measures,which can ensure the safety 。
2.求一篇土木工程英文文献翻译,毕业设计用的
刚好我也在做毕业设计 把我的给你用吧 Traditional Construction Procedures As mentioned before, construction under the traditional construction procedure is performed by contractors. While they would like to satisfy the owner and the building designers, contractors have the main objective of making a profit. Hence, their initial task is to prepare a bid price based on an accurate estimate of construction costs. This requires development of a concept for performance of the work and a construction time schedule. After a contract has been awarded, contractors must furnish and pay for all materials, equipment, power, labor, and supervision required for construction. The owner compensates the contractors for construction costs and services. A general contractor assumes overall responsibility for construction of a building. The contractor engages subcontractors who take responsibility for the work of the various trades required for construction. For example, a plumbing contractor installs the plumbing, an electrical contractor installs the electrical system, and an elevator contractor installs elevators. Their contracts are with the general contractor, and they are paid by the general contractor. Sometimes, in addition to a general contractor, the owner contracts separately with specialty contractors, such as electrical and mechanical contractors, who perform a substantial amount of the work require for a building. Such contractors are called prime contractors. Their work is scheduled and coordinated by the general contractor, but they are paid directly by the owner. Sometimes also, the owner may use the design-build method and award a contract to an organization for both the design and construction of a building. Such organizations are called design-build contractors. One variation of this type of contract is employed by developers of groups of one-family homes or low-rise apartment buildings. The homebuilder designs and constructs the dwellings, but the design is substantially completed before owners purchase the homes. Administration of the construction procedure often is difficult. Consequently, some owners seek assistance from an expert, called a professional construction manager, with extensive construction experience, who receives a fee. The construction manager negotiates with general contractors and helps select one to construct the building. Managers usually also supervise selection of subcontractors. During construction, they help control costs, expedite equipment and material deliveries, and keep the work on schedule. In some cases, instead, the owner may prefer o engage a construction program manager, to assist in administrating both design and construction. Construction contractors employ labor that may or may not be unionized. Unionized craftspeople are members of unions that are organized by construction trades, such as carpenter, plumber, and electrician unions, Union members will perform only the work assigned to their trade. During construction, all work should be inspected. For this purpose, the owner, often through the architect and consultants, engages inspectors. The field inspectors may be placed under the control of an owner's representative, who may be titled clerk of the works, architect's superintendent, engineer's superintendent, or resident engineer. The inspectors have the responsibility of ensuring that construction meets the requirements of the contract documents and is performed under safe conditions. Such inspections may be made at frequent intervals. In addition, inspections also are made by representatives of one or more governmental agencies. They have the responsibility of ensuring that construction meets legal requirements and have little or no concern with detailed conformance with the contract documents. Such legal inspections are made periodically or at the end of certain stages of construction. One agency that will make frequent inspections is the local or state building department, whichever has jurisdiction. The purpose of these inspections is to ensure conformance with the local or state building code. Following is a description of the basic traditional construction procedure for a multistory building. After the award of a construction contract to a general contractor, the owner may ask the contractor to start a portion of the work before signing of the contract by giving the contractor a letter of intent or after signing of the contract by issuing a written notice to proceed. The contractor then obtains construction permits, as required, form governmental agencies, such as the local building, water, sewer, and highway dep。
3.求土木工程毕业外文翻译一篇
building types and design A building is closely bound up with people,for it provides with the necessary space to work and live in .As classified by their use ,buildings are mainly of two types :industrial buildings and civil buildings .industrial buildings are used by various factories or industrial production while civil buildings are those that are used by people for dwelling ,employment ,education and other social activities .Industrial buildings are factory buildings that are available for processing and manufacturing of various kinds ,in such fields as the mining industry ,the metallurgical industry ,machine building ,the chemical industry and the textile industry . factory buildings can be classified into two types single-story ones and multi-story ones .the construction of industrial buildings is the same as that of civil buildings .however ,industrial and civil buildings differ in the materials used and in the way they are used .Civil buildings are divided into two broad categories: residential buildings and public buildings .residential buildings should suit family life .each flat should consist of at least three necessary rooms : a living room ,a kitchen and a toilet .public buildings can be used in politics ,cultural activities ,administration work and other services ,such as schools, office buildings, parks ,hospitals ,shops ,stations ,theatres ,gymnasiums ,hotels ,exhibition halls ,bath pools ,and so on .all of them have different functions ,which in turn require different design types as well. Housing is the living quarters for human beings .the basic function of housing is to provide shelter from the elements ,but people today require much more that of their housing .a family moving into a new neighborhood will to know if the available housing meets its standards of safety ,health ,and comfort .a family will also ask how near the housing is to grain shops ,food markets ,schools ,stores ,the library ,a movie theater ,and the community center .In the mid-1960's a most important value in housing was sufficient space both inside and out .a majority of families preferred single-family homes on about half an acre of land ,which would provide space for spare-time activities .in highly industrialized countries ,many families preferred to live as far out as possible from the center of a metropolitan area ,even if the wage earners had to travel some distance to their work .quite a large number of families preferred country housing to suburban housing because their chief aim was to get far away from noise ,crowding ,and confusion .the accessibility of public transportation had ceased to be a decisive factor in housing because most workers drove their cars to work .people we're chiefly interested in the arrangement and size of rooms and the number of bedrooms .Before any of the building can begin ,plans have to be drawn to show what the building will be like ,the exact place in which it is to go and how everything is to be done.An important point in building design is the layout of rooms ,which should provide the greatest possible convenience in relation to the purposes for which they are intended .in a dwelling house ,the layout may be considered under three categories : “day”, “night” ,and “services” .attention must be paid to the provision of easy communication between these areas .the “day “rooms generally include a dining-room ,sitting-room and kitchen ,but other rooms ,such as a study ,may be added ,and there may be a hall .the living-room ,which is generally the largest ,often serves as a dining-room ,too ,or the kitchen may have a dining alcove .the “night “rooms consist of the bedrooms .the “services “comprise the kitchen ,bathrooms ,larder ,and water-closets .the kitchen and larder connect the services with the day rooms .It is also essential to consider the question of outlook from the various rooms ,and those most in use should preferably face south as possible .it is ,however ,often very difficult to meet the optimum requirements ,both on account of the surroundings and the location of the roads .in resolving these complex problems ,it is also necessary to follow the local town-planning regulations which are concerned with public amenities ,density of population ,height of buildings ,proportion of green space to dwellings ,building lines ,the general appearance of new properties in relation to the neighbourhood ,and so on .There is little standardization in industrial buildings although such buildings still need to comply with local town-planning regulations .the modern trend is towards light ,airy factory buildings .generally of reinforced concrete or metal construction ,a factory can be given a “shed ”type ridge roof ,。
4.本人土木专业,做毕业设计时有一篇外国土木文献需要翻译,高分求高
Compressive behavior of concrete externally confined bycomposite jackets. 外部复合护套约束的混凝土压缩性Part A: experimental study Part A： 实验性研究This paper presents the results of an experimental investigation concerning the compressive behavior of concrete short columns externally confined by carbon and E-glass FRP jackets. The influences of different parameters such as the confinement level, the mechanical properties of the jackets and the compressive strength of the concrete core were studied. The results show that external confinement can significantly improve the ultimate strength and ductility of the specimens. The stress–strain response of confined concrete is bilinear: in the first linear zone, the behaviors of plain and confined concrete specimens are similar, whereas in the second pseudo-plastic branch, the behavior of confined concrete depends mainly on the jacket mechanicals properties. Test results demonstrate that the second part of (plastic) the stress–strain response depends on the jacket stiffness and that the ultimate strength of the jacket and the concrete strength are the most influential factors affecting the ultimate strength and strain of the confined concrete. Also, the study indicates that the confinement efficiency falls when the compressive strength of the concrete core increases.本篇论文阐述了有关于外部多重碳纤维和无碱玻璃纤维增强塑料紧箍护套的短柱混凝土压缩性试验研究结果。
研究表明对其压缩性影响的因素有如约束层数，护套的力学特征，以及混凝土核心的抗压强度。研究结果发现试样的外部约束复合层对其极限强度和延伸性有显著提高。
约束型混凝土的应力应变结果具有双线性特征：在一线区域，平面性能与约束型混领土压缩性试样相似，但是在第二伪塑性分叉区。约束型混凝土压缩性主要是靠复合层的力学性能支持。
测试结果表明了第二部分（塑料）的反应主要是由护套的钢度支持，护套的极限强度以及混凝土的强度对约束型混凝土的极限强度和极限应变度影响因素最大。研究还发现约束效应在混凝土核心的抗压力上升后会降低。
Keywords: Confined concrete; FRP jackets; HPC关键词：约束型混凝土 FRP护套 HPC。
5.土木工程英语论文翻译
可以看看这个 呵呵 是 土木专业英语上的课文 building types and design A building is closely bound up with people,for it provides with the necessary space to work and live in .As classified by their use ,buildings are mainly of two types :industrial buildings and civil buildings .industrial buildings are used by various factories or industrial production while civil buildings are those that are used by people for dwelling ,employment ,education and other social activities .Industrial buildings are factory buildings that are available for processing and manufacturing of various kinds ,in such fields as the mining industry ,the metallurgical industry ,machine building ,the chemical industry and the textile industry . factory buildings can be classified into two types single-story ones and multi-story ones .the construction of industrial buildings is the same as that of civil buildings .however ,industrial and civil buildings differ in the materials used and in the way they are used .Civil buildings are divided into two broad categories: residential buildings and public buildings .residential buildings should suit family life .each flat should consist of at least three necessary rooms : a living room ,a kitchen and a toilet .public buildings can be used in politics ,cultural activities ,administration work and other services ,such as schools, office buildings, parks ,hospitals ,shops ,stations ,theatres ,gymnasiums ,hotels ,exhibition halls ,bath pools ,and so on .all of them have different functions ,which in turn require different design types as well. Housing is the living quarters for human beings .the basic function of housing is to provide shelter from the elements ,but people today require much more that of their housing .a family moving into a new neighborhood will to know if the available housing meets its standards of safety ,health ,and comfort .a family will also ask how near the housing is to grain shops ,food markets ,schools ,stores ,the library ,a movie theater ,and the community center .In the mid-1960's a most important value in housing was sufficient space both inside and out .a majority of families preferred single-family homes on about half an acre of land ,which would provide space for spare-time activities .in highly industrialized countries ,many families preferred to live as far out as possible from the center of a metropolitan area ,even if the wage earners had to travel some distance to their work .quite a large number of families preferred country housing to suburban housing because their chief aim was to get far away from noise ,crowding ,and confusion .the accessibility of public transportation had ceased to be a decisive factor in housing because most workers drove their cars to work .people we're chiefly interested in the arrangement and size of rooms and the number of bedrooms .Before any of the building can begin ,plans have to be drawn to show what the building will be like ,the exact place in which it is to go and how everything is to be done.An important point in building design is the layout of rooms ,which should provide the greatest possible convenience in relation to the purposes for which they are intended .in a dwelling house ,the layout may be considered under three categories : “day”, “night” ,and “services” .attention must be paid to the provision of easy communication between these areas .the “day “rooms generally include a dining-room ,sitting-room and kitchen ,but other rooms ,such as a study ,may be added ,and there may be a hall .the living-room ,which is generally the largest ,often serves as a dining-room ,too ,or the kitchen may have a dining alcove .the “night “rooms consist of the bedrooms .the “services “comprise the kitchen ,bathrooms ,larder ,and water-closets .the kitchen and larder connect the services with the day rooms .It is also essential to consider the question of outlook from the various rooms ,and those most in use should preferably face south as possible .it is ,however ,often very difficult to meet the optimum requirements ,both on account of the surroundings and the location of the roads .in resolving these complex problems ,it is also necessary to follow the local town-planning regulations which are concerned with public amenities ,density of population ,height of buildings ,proportion of green space to dwellings ,building lines ,the general appearance of new properties in relation to the neighbourhood ,and so on .There is little standardization in industrial buildings although such buildings still need to comply with local town-planning regulations .the modern trend is towards light ,airy factory buildings .generally of reinforced concrete or metal construction ,a factory can 。
6.求土木工程毕业外文翻译一篇
building types and designA building is closely bound up with people,for it provides with the necessary space to work and live in .As classified by their use ,buildings are mainly of two types :industrial buildings and civil buildings .industrial buildings are used by various factories or industrial production while civil buildings are those that are used by people for dwelling ,employment ,education and other social activities .Industrial buildings are factory buildings that are available for processing and manufacturing of various kinds ,in such fields as the mining industry ,the metallurgical industry ,machine building ,the chemical industry and the textile industry . factory buildings can be classified into two types single-story ones and multi-story ones .the construction of industrial buildings is the same as that of civil buildings .however ,industrial and civil buildings differ in the materials used and in the way they are used .Civil buildings are divided into two broad categories: residential buildings and public buildings .residential buildings should suit family life .each flat should consist of at least three necessary rooms : a living room ,a kitchen and a toilet .public buildings can be used in politics ,cultural activities ,administration work and other services ,such as schools, office buildings, parks ,hospitals ,shops ,stations ,theatres ,gymnasiums ,hotels ,exhibition halls ,bath pools ,and so on .all of them have different functions ,which in turn require different design types as well. Housing is the living quarters for human beings .the basic function of housing is to provide shelter from the elements ,but people today require much more that of their housing .a family moving into a new neighborhood will to know if the available housing meets its standards of safety ,health ,and comfort .a family will also ask how near the housing is to grain shops ,food markets ,schools ,stores ,the library ,a movie theater ,and the community center .In the mid-1960's a most important value in housing was sufficient space both inside and out .a majority of families preferred single-family homes on about half an acre of land ,which would provide space for spare-time activities .in highly industrialized countries ,many families preferred to live as far out as possible from the center of a metropolitan area ,even if the wage earners had to travel some distance to their work .quite a large number of families preferred country housing to suburban housing because their chief aim was to get far away from noise ,crowding ,and confusion .the accessibility of public transportation had ceased to be a decisive factor in housing because most workers drove their cars to work .people we're chiefly interested in the arrangement and size of rooms and the number of bedrooms .Before any of the building can begin ,plans have to be drawn to show what the building will be like ,the exact place in which it is to go and how everything is to be done.An important point in building design is the layout of rooms ,which should provide the greatest possible convenience in relation to the purposes for which they are intended .in a dwelling house ,the layout may be considered under three categories : “day”, “night” ,and “services” .attention must be paid to the provision of easy communication between these areas .the “day “rooms generally include a dining-room ,sitting-room and kitchen ,but other rooms ,such as a study ,may be added ,and there may be a hall .the living-room ,which is generally the largest ,often serves as a dining-room ,too ,or the kitchen may have a dining alcove .the “night “rooms consist of the bedrooms .the “services “comprise the kitchen ,bathrooms ,larder ,and water-closets .the kitchen and larder connect the services with the day rooms .It is also essential to consider the question of outlook from the various rooms ,and those most in use should preferably face south as possible .it is ,however ,often very difficult to meet the optimum requirements ,both on account of the surroundings and the location of the roads .in resolving these complex problems ,it is also necessary to follow the local town-planning regulations which are concerned with public amenities ,density of population ,height of buildings ,proportion of green space to dwellings ,building lines ,the general appearance of new properties in relation to the neighbourhood ,and so on .There is little standardization in industrial buildings although such buildings still need to comply with local town-planning regulations .the modern trend is towards light ,airy factory buildings .generally of reinforced concrete or metal construction ,a factory can be given a “shed ”type ridge roof ,incorpora。
7.求一篇毕业外文翻译,关于土木工程专业的,2000字左右
给你篇沥青方面的吧，不知道能否适合 Segregation of Asphalt Pavement [Abstract] This paper describes the Weiwu highway construction, the analysis of asphalt pavement segregation. From raw materials to finished products into the plant's appearance transport asphalt and paving mixture during the various factors that affect quality, and to all aspects of the various segregation of solutions put forward [Key words] segregation segregation Segregation of control 1. Project Overview Shandong Wei (Shanghai) to Ukraine (sea) highway segment second contract start and end mileage K11 +300 ~ K22 +700, full 11.4KM, according to two-way four-lane design. Mainline pavement structure: Upper layer: the top layer of asphalt Horseshoe fat (SMA-13A) 4CM In the surface layer: surface layer of asphalt concrete (AC-20B) 6CM The following layers: Asphalt Concrete (AC-25B) 8CM 2. Segregation Asphalt road surface segregation is a major area of asphalt mixture uneven nature, such as asphalt content, aggregate composition, additive content and the porosity and other surface. 3. Segregation of the hazard Segregation of the event, they changed the original design of the pavement with, the quality of asphalt pavement segregation great harm. In particular in： ○ 1 rolling process, easily crushed coarse aggregate ○ 2 aggregate surface area increases, resulting in rolling after molding loose, damaged road pavement structural strength of influence ○ 3 concentration of coarse aggregate to pavement deterioration of local density, high porosity, easily formed in the surface water, causing water damage to the road early ○ 4 disease have a lot of asphalt mixture segregation and closely related, such as: loose, net crack, holes, local severe Track Channel, local weeping, newly paved asphalt pavement structure of the depth of inequality. ○ 5 Segregation of Asphalt Pavement Compaction will produce differences in degree of compaction, smoothness impact damaged the car's comfort 4. Segregation of species Segregation will affect the road surface appearance, asphalt mixture segregation can be broadly classified into two types: level and temperature segregation with segregation. Gradation segregation occurs, asphalt road coarse material concentrated in some regions, while others focus on regional fine materials, making become uneven mixture gradation and asphalt content and design are inconsistent, leading to poor road showing the structure and texture characteristics . Concentration of fine material in some regions, the porosity is small, there may be weeping, rutting; other coarse material concentrated in some regions, high porosity, surface water may cause damage. Temperature segregation is the mixture in the storage, transportation and spreading in the weather, construction machinery impact, because the temperature difference between heat loss and the situation there. Mixture temperature of segregation, will lead to uneven road surface compaction, low temperature region, the road porosity greater texture depth of greater road in these areas prone to early damage. Temperature of the consequences of segregation and isolation graded as severe, can lead to premature failure of asphalt pavement, greatly shorten the life of asphalt pavement. Research shows that serious segregation of the road life may be reduced by 50% or more. Present some early Asphalt Pavement damage, such as loose, net crack, holes, local severe Track Channel, local weeping, newly paved asphalt pavement structure of the depth of inequality, with the asphalt mixture segregation are closely related. 5. Segregation generation Asphalt Mixture Segregation affect the characteristics of the pavement, and segregation issue has been throughout the construction process, it is the construction unit has long been one of the urgent solution of the problem. 5.1 Segregation of raw materials In the raw materials transported from the quarry to the mixing station piling up, because a high degree of reason, a large aggregate rolled off the bottom of the heap in the material to form a coarse aggregate material the first focus, which will Segregation material mixing machine feeding in the cold difficult to control when different silos of the material ratio; 5.2 Segregation of mixing station mixing machine When using the scraper conveyor to unload mixture into the finished product hopper, the hopper must be located in the central discharge hopper, or the body in a barrel of vertical segregation, that crude is expected to roll it toward the side of hopper. When using the scraper conveyor to unload into the ingredient mixture into the。
8.毕业设计外文翻译
Introduction to Civil Engineering Papers Civil Engineering for the development of a key role, first as a material foundation for the civil engineering construction materials, followed by the subsequent development of the design theory and construction technology. Every time a new quality of building materials, civil engineering will be a leap-style development.People can only rely on the early earth, wood and other natural materials in the construction activities, and later appeared in brick and tile that artificial materials, so that the first human to break the shackles of natural building materials. China in the eleventh century BC in the early Western Zhou Dynasty created the tile. The first brick in the fifth century BC to the third century BC, when the tomb of the Warring States Period. Brick and tile better than the mechanical properties of soil, materials, and easy to manufacture.The brick and tile so that people began to appear widely, to a large number of housing construction and urban flood control project, and so on. This civil engineering technology has been rapid development. Up to 18 to the 19th century, as long as two thousand years, brick and tile has been a major civil engineering construction materials, human civilization has made a great contribution to the even was also widely used in the present.The application of a large number of steel products is the second leap in civil engineering. Seventeen 1970s the use of pig iron, the early nineteenth century, the use of wrought iron bridges and the construction of housing, which is a prelude to the emergence of steel.From the beginning of the mid-nineteenth century, metallurgical industry, smelting and rolling out high tensile and compressive strength, ductility, uniformity of the quality of construction steel and then produce high-strength steel wire, steel cables. As a result of the need to adapt to the development of the steel structure have been flourishing. In addition to the application of the original beam, arch structure, the new truss, a framework, the structure of network, cable structures to promote the gradual emergence of the structure of Yan in the form of flowers.From the brick building long-span structures, stone structures, a few meters of wood, steel structure to the development of tens of meters, a few hundred meters, until modern km above. So in the river, cross the bridge from shelves, on the ground since the construction of skyscrapers and high-rise tower, even in the laying of underground railway, to create an unprecedented miracle.In order to meet the needs of the development of steel works, on the basis of Newton's mechanics, material mechanics, structural mechanics, structural engineering design theory came into being, and so on. Construction machinery, construction technology and construction organization design theory also development, civil engineering from the experience of rising to become science, engineering practice and theoretical basis for both is a different place, which led to more rapid development of civil engineering.During the nineteenth century, 20, made of Portland cement, concrete has come out. Concrete can aggregate materials, easy-to-concrete structures forming, but the tensile strength of concrete is very small, limited use. By the middle of the nineteenth century, the surge in steel production, with the emergence of this new type of reinforced concrete composite construction materials, which bear the tension steel, concrete bear the pressure and play their own advantages. Since the beginning of the 20th century, reinforced concrete is widely used in various fields of civil engineering.From the beginning of the 1930s, there have been pre-stressed concrete. Pre-stressed concrete structure of the crack resistance, rigidity and carrying capacity, much higher than the reinforced concrete structure, which uses an even wider area. Civil Engineering into the reinforced concrete and prestressed concrete dominant historical period. Concrete buildings to bring about the emergence of new economic, aesthetic structure in the form of engineering, civil engineering so that a new construction technology and engineering design of the structure of the theory. This is another leap in the development of civil engineering.A project to build the facilities in general to go through the investigation, design and construction in three stages, require the use of geological prospecting projects, hydro-geological survey, engineering survey, soil mechanics, mechanical engineering, engineering design, building materials, construction equipment, engineering machinery, building the economy , And other disciplines and 。
9.跪求一篇关于土木工程的中英文翻译论文 5000字 毕业用的 在线等
Improved nonlinear plastic hinge analysis of space frame structures J.Y. Richard Liew a,*, H. Chen a, N.E. Shanmugam a, W.F. Chen b a Department of Civil Engineering, National University of Singapore, 10 Kent Ridge Crescent, Singapore 119260, Singapore b School of Civil Engineering, Purdue University, West Lafayette, IN 47907, USA Received 5 January 1999; received in revised form 17 August 1999; accepted 25 August 1999 Abstract This paper is concerned with second-order plastic hinge analysis of three-dimensional frame structures. The beam–column formulation is based on the use of stability interpolation functions for the transverse displacements, and considers the elastic coupling effects between axial, flexural and torsional displacements. The developed computer program can be used to predict accurately the elastic flexural buckling load of columns and frames by modelling each physical member as one element. It can also be used to predict the elastic buckling loads associated with axial-torsional and lateral-torsional instabilities, which are essential for predicting the nonlinear behaviour of space frame structures. The member bowing effect and initial out-of-straightness are also considered so that the nonlinear spatial behaviour of structures can be captured with fewer elements per member. Material nonlinearity is modelled by using the concentrated plastic hinge approach. Plastic hinge between the member ends is allowed to occur. Numerical examples including both geometric and material nonlinearities are used to demonstrate the robustness, accuracy and efficiency of the proposed analytical method and computer program. Ó 2000 Elsevier Science Ltd. All rights reserved.Keywords: Advanced analysis; Buckling; Nonlinear analysis; Plastic hinges; Space frames; Instability1. Introduction Two-dimensional (2-D) plastic hinge analysis of plane frames composed of members with compact section,fully braced out-of-plane, has been the subject for investigation in recent years. The theory for advanced inelastic analysis of rigid and semi-rigid 2-D frames has been well developed and verified by tests [1,2]. These analysis methods fulfil the requirements for the prediction of member strength and stability, with some constraints,satisfying the conventional column and beam–column design limit-state checks. Although there have been much work on the plastic hinge analysis of 3-D frame structures, the issues related to different theoretical and numerical formulations and their accuracy and efficiency in solving large frameworks are not addressed well. The research presented in this paper is an extension of advanced analysis for 2-D frames [2] to 3-D frames [3–5], reflecting the current trend towards the rationalisation of advanced analysis procedures.* Corresponding 改进非线性塑性铰空间框架结构的分析 摘要：这份研究报告表明三维的框架结构与二维逻辑性塑性铰的关联，梁柱公式化的表述并嵌入横断面移动为基准，并考虑轴力、弯曲和扭力的移位之间的关系。
发达的计算机程序作出通过每个物质成分作为一个基本部件做模型的塔器和框架可弯曲的负载量，它也能预报可弯曲负载量与轴向扭力和横向扭力的不稳定性的关联，这对预报非线性空间结构的作用是必不可少的，以便非线性空间结构的性能和部分成分一些原理能被输入计算机。重要的非线性通过使用浓缩的塑性铰方式被制作模型，塑性铰和成分末端是容许存在。
数值的例子包括集合学和重要的非线性，两者习惯于证明目的的分析方法和电脑程序的稳定性，精确性。