众文网1.求一篇自动化方面英文文章带中文翻译的3000千字
The main advantage of this concept is that the consecutive controller is able to control disturbances of humidifying arrangement directly, because the dew point measurement of the humidifier has got a very short response time compared with the quite longer response time of the furnace dew point. This is caused by bigger time delays of the measurement and the delay time of the process gas to come into the furnace. Analysis station for CO/CO2, H2 and O2ppm monitoring, extracting method will be multiplexed sampling An analysis station designed as a complete functional unit will be used for monitoring the composition of the atmosphere in the Furnace. The analysis station will be a single-cabinet unit complete with analyzers, pumps, solenoid valves and control unit. In normal operation, the sample gas switchover system will switch cyclically between the different sample gases. The system can also be switched to nitrogen for purging or to a calibration gas; this is not part of the normal cycle. The sample waste gas will be fed from the sampling probe on the furnace (with filter) to the analyser or sample gas treatment system through a sample gas line routed downwards. Sample gas from each sample gas point will be extracted by the main sample gas pump to the analyser station. The sample gas 'in measurement' will be switched to the measurement line from where an additional pump pumps it to the analysers. The sample gas lines will be made from acid-resistant plastic. The multiplexing analysis system has following probes: For CO/CO2 the system in an actual mode can be calibrated automatically every day using an in-built comparison probe. The calibration time is triggered using an internal period value, which can be changed manually. During calibration time no measurement values are available. A particular feature will be to switch from multiplexing measuring mode to single mode, where a certain probe gas inlet can be measured continuously and vice versa. 这一进程所提供的气体，搅拌站在预热时将用换热器。
天然气将在一个封闭的循环进行温度对照。预热H2/N2分配给不同的加湿器系统。
在加湿器的过程中，天然气将利用富含水蒸汽的需要，在暖气炉中创造一个稳定的露点。在炉中，露点将成为衡量的加湿器。
这两种测量将用于控制级联控制电路中所描述的下一章。 下面的示意图显示了控制概念的一个区的脱碳炉。
为了获得非常高的质量控制级联控制电路使用，凡有主控制器采用实际露点值精度高，手中的设置点的连续控制器作为输出。 这种控制器调整1露点的进程直接测量气体的出口加湿器。
它的主要优势是，这一概念 连续控制器能够控制骚乱直接加湿的安排，因为露点测量加湿器得到了很短的响应时间与反应时间而且很长的炉露点。这是造成更多的时间从而延迟测量和延迟气体进入炉的时间进程。
分析站CO/CO2 , H2和O2ppm监测， 提取方法将采样： 分析站设计作为一个完整的功能单位将用于组成气氛炉中进行监测。 分析站将是一个单一完整的内阁单位与分析仪，水泵，电磁阀和控制单元。
在正常操作时，样品气体切换系统将切换周期性不同样本之间的气体。该系统还可以切换到氮清洗或校准气体，这是不正常的周期。
抽样废气将美联储从取样探头的炉（带过滤器）的分析仪或样品气体处理系统通过抽样天然气管线路由向下。样品气体从每个样品天然气将是主要的提取汽油样品的分析仪站。
样本气体测量中'将切换到测量线从那里额外泵泵给分析器。抽样天然气管道将来自耐酸塑料。
在复分析系统具有以下探针： 为CO/CO2该系统在实际模式可自动校准，每天使用的是内置的比较调查。校准时间是引发内部期间使用的价值，可手动改变。
在校准时没有测量值。 一个特别的功能将被转换复测模式，以单一的模式，在一定的探测气体入口可以连续测量，反之亦然。
这一进程所提供的气体搅拌站将预热用换热器。温度对照的天然气将在一个封闭的循环。
预热H2/N2分配给不同的加湿器系统。在加湿器的过程天然气将富含水蒸汽的需要，以创造一个稳定的露点在炉。
露点将成为衡量的加湿器，并在炉。这两种测量将用于控制级联控制电路中所描述的下一章。
下面的示意图显示了控制概念的一个区的脱碳炉。 为了获得非常高的质量控制级联控制电路使用，凡有主控制器采用实际露点值精度高，手中的设置点的连续控制器作为输出。
这种控制器调整1露点的进程直接测量气体的出口加湿器。 的主要优势是，这一概念 连续控制器能够控制骚乱的直接加湿的安排，因为露点测量加湿器得到了很短的响应时间与反应时间很长的炉露点。
这是造成更大的时间延迟的测量和延迟时间的进程气体进入炉。 分析站CO/CO2 , H2和O2ppm监测， 提取方法将复采样 分析站设计作为一个完整的功能单位将用于监测的组成气氛炉。
分析站将是一个单一完整的内阁单位与分析仪，水泵，电磁阀和控制单元。在正常操作。
2.自动化专业英语用来给老师翻译的自动化英语论文给一篇,字数越多越
Abstract are getting a rapid development with the development and application
of science and technology, electrical engineering, automation control, electrical engineering construction of power system operation quality in some extent plays a decisive role. In order to ensure the healthy development of the overall electrical engineering, enhance electrical engineering and automation control level of the industry as a whole, intelligent technology is referenced to the electrical engineering automation control and management. Now mainly on intelligent technology theoretical basis, technical superiority and in electrical engineering and automation control in the process of practical application in are analyzed and discussed.
3.自动化论文摘要翻译成英文,在线等
A new design of infrared wireless alarm system. This paper designs a new type of multi-function wireless burglar alarm system, including both hardware and software parts. Hardware includes single chip control circuit, infrared sensor circuit, driving the implementation of the alarm circuit, led control circuit and other components. Some parts of the software, including signal acquisition, alarm parts, interrupted part. Processor with 51 series at89c51, the whole system is under the control of the system software to work. It is a non-contact form of infrared radiation detected in the human body and its transformation into a voltage signal at the same time, it can identify the biological and other non-sports。
4.自动化论文摘要英文翻译,请帮我修改一下
Abstract: This article introduces the AT89C51 MCU-based single-color LED display control characters show the basic principles of the hardware and software and systems design. First outlined the LED display profile and development, and the ranks of LED display module driver made a brief description of principles followed by emphasis on analysis and design of a microcontroller control system hardware and related devices, explained the principle; Final completion of the system's display drivers, the system main program, and list some of the source. The results showed that the system can achieve sub-screen display and scanning the left scan showed that the effect of, and a serial data input, parallel and synchronized clock output data for the circuit can greatly reduce the input and output MCU I / O of the occupation, increase data transmission Rate.
Key words: LED MCU MCU scan display driver
5.急求一下自动化专业课英文翻译
电路理论 Theory of Circuitry
自动控制原理 Principles of Automatic Control
MATLAB程序设计及应用 Design and application of MATLAB procedure
电机与拖动 Electrical Machinery and Towage
自动控制系统 Automatic Control System
电力拖动自动控制系统 Electric Drive Automatic Control System
电力电子技术 Power and Electron Technology
计算机控制技术 Computer Control Technology
现代控制理论 Modern Control Theory
工厂供电 Factory Electricity Supply
传感器原理及应用 Fundamentals and Application of Sensors
轮机自动化 Marine machinery Automation
船舶电气 Marine Electric
过程控制系统 Process Control System
交流电机控制技术 AC Electromotor Control Technology
电器与PLC控制技术 Electric Appliances and PLC Control Technology
搞定，查阅机械英语翻译，请验收
6.毕业论文英文摘要翻译
Today, for any enterprise, rationalization and automation and flexibility are vital factor, only each process and control, and straighten out the use of advanced logistics method and automation system can solve this problem is the demand in the fierce competition in the decisive factor of advantage.
Modern industry is the development trend of informatization, automation, network, intelligent, flexibility, especially China has joined the WTO, the development of modern science and technology and the accelerated pace of global economic integration, it is required in our industrial automation
7.求一篇自动化专业的英语文章
In this winding system, we use Mitsubishi A series PLC as master stationPLC because it has the characteristic of quick response and great ability ofinformation processing. It is used to control the behaviors of the totalwinding system together with FX series PLCs of winding and unwindingsystem. The operating actions of the system and the sequence of theseactions were edited beforehand into the control program by the designer. Thecontrol program sets a series of operations of the winding system, which tellsthe PLCs how to control a system. The current states of all sensors oractuators are saved as an array of input, output or flag signals in the PLCmemory. Therefore, the PLC program is the basis of monitoring in a PLCcontrolled manufacturing system. The programming method used is the ladder diagram method. The PLCsystem provides a design environment in the form of software tools runningon a host computer terminal which allows ladder diagrams to be developed,verified, tested, and diagnosed. First, the high-level program is written indiagrams. Then, the ladder diagram is converted into binary instructioncodes so that they can be stored in random-access memory (RAM) orerasable programmable read-only memory (EPROM). Each successiveinstruction is decoded and executed by the CPU. Thefimctionof the CPU is to control the operation of memory and I/O devices and to process data according to the program. Each input and output connection point on a PLChas an address used to identify the I/O bit. The method for the directrepresentation of data associated with the inputs, outputs, and memory isbased on the fact that the PLC memory is organized into three regions: input image memory, output image memory, and internal memory。
如果没有别人有发 就把分数给我吧 这年头赚点分不容易呐 -0-祝学习顺利。
8.英语作文：关于对于自动化专业英语的认识,120词左右
The Electrical Engineering Technology - Process Automation program provides you with the basic knowledge of electricity and electronics. As a student, you will learn to apply related subjects such as computer technology, industrial electronics, instrumentation, electrical machines, robotics, power electronics, and automated control systems. AS a graduate, you will be geared towards a career in the industrial environment.
You will be able to understand written and oral instructions, as well as design, install, test, modify, troubleshoot, and repair electrical systems.
Upon graduation, students of the Electrical Engineering Technology – Process Automation program can approach industrial electrical and electronic systems from the viewpoint of analysis, technical evaluation, design, and development. The six-semester program concentrates on the in-depth study of electrical and electronic principles as they apply to automated systems using programmable logic controllers. The program is geared to providing you with a sound basis for employment at the advanced level that may lead to a career in a supervisory position. `Thru-way` programs offer diplomas at the completion of Year 2 and have an additional year of study when there is sufficient enrolment.
Technician and technology graduates who have had two years of acceptable work experience are eligible for certification by the Ontario Association of Certified Engineering Technicians and Technologists (OACETT).
Students may have the opportunity to be involved in applied research projects. Please see the `Applied Research Centre` section for more information relating to the Sault College Applied Research Centre.