众文网1.建筑论文外文参考文献
A construction-led design process for tubular trusses
Design Studies, Volume 15, Issue 3, July 1994, Pages 248-259
Walid M.K. Tizani, Gwynne Davies, Timothy J. McCarthy2.Construction design and management safety regulations in practice— on implementation
International Journal of Project Management, Volume 18, Issue 1, February 2000, Pages 33-40
Tony Baxendale, Owain Jones 3.Design and construction of a concrete floating berth
Engineering Structures, Volume 18, Issue 11, November 1996, Pages 837-841
P. Starr, D. A. Wainwright4.Design, construction and testing of an air-cycle refrigeration system for road transport
International Journal of Refrigeration, Volume 27, Issue 5, August 2004, Pages 503-510
Stephen W. T. Spence, W. John Doran, David W. Artt 5.Design, construction and performance prediction of integrated solar roof collectors using finite element analysis
Construction and Building Materials, Volume 21, Issue 5, May 2007, Pages 1069-1078
Marwa M. Hassan, Yvan Beliveau
2.急求一篇土木工程毕业论文英文文献及翻译,不少于3000个单词
Research on the construction safety management of Civil Engineering In recent years, the construction accident in civil engineering in our country often occur. This not only caused casualties, also caused great loss of national property, and resulting in a very bad social influence. Therefore, in our country, the construction units in the civil engineering construction projects, shouldstrengthen the construction safety management, all aspects ofsecurity control for engineering, to prevent dangerous accidentsin the end it all. The cause of the civil engineering constructionaccidents are in many aspects. In order to enhance security,should be combined with the characteristics of construction projects and the enterprise's internal and external conditions, the rational allocation of production factors, optimization of management process. In order to realize the construction safetymanagement, construction units should establish a safety management system of a project, it should be carried out from the following aspects:A construction safety consciousness, cultivate the modern safety science theory, occurrence of unsafe human behavior causedcasualties. To implement safety management, it should becombined with psychology, behavioral science to strengthen the education and training of employees in production safety,improve the consciousness of safe production, so as to guide the safety production behavior of employees. For the construction enterprises should strengthen safety awareness and educationproject personnel, developing the regular safety education to the construction personnel involved in the project, and to carry outsecurity work. Three level education to the new participate in the work of the operating personnel; often transform types of employees, should be safety training for new types of work, makeoperation personnel matters needing attention can be familiar with the safe operation of the. In order to make safe win support among the people, enterprisemanagement personnel but also in engineering project, using a variety of promotional tools to start a variety of education,cultivate the construction personnel safety consciousness. Andin the management of enterprises, the production safety systemthought to. Leaders at all levels and enterprises in issuing the project production task, should also carry out safety productionmeasures. Such as the production safety requirements to the construction personnel, so conducive to safe thought into the production of management, let each employee has consciously in the psychological sense of security.Two, the establishment of management system for safety in production in addition to strengthen production safety education and awareness of construction project staff, should alsoestablish a safety management system, protect the system from the construction enterprise safety in production of. In order toavoid the frequent occurrence of sudden accident, the construction enterprise should according to the project, to develop a comprehensive, the system of safety management,and invest the necessary manpower and funds to ensure the implementation of the project. Ensure the production safetyconstruction from the system implementation, the project section of construction enterprises should establish the safety inspectionsystem, and regularly to the project construction of the security check. Make a clear record of project construction process,record the dangerous post, and regularly check the work. Self evaluation and construction team every week to organize asafety activities, the project department to make regular safetyevaluation for project production. Construction enterprises in theconstruction of civil engineering, in order to establish a safety management system, need to make corresponding technical measures for safety management system, a standard for project.Therefore, the safety work of construction enterprise project technical measures should be prior to commencement of works.As for engineering and technical measures should be strict examination and approval, the approval before implementation. If the design changes during construction, corresponding safety technical measures should be coordinated with the adjustment,will follow. The safety technical measures enacted personnel andparticipation, should fully understand the project as the construction scheme, construction environment, the actualoperation has, and combined with relevant laws and regulations or the security policy to establish safety technical measures,which can ensure the safety 。
3.求一篇关于建筑方面的英文文献
关于“Modern Architecture”的 Modern architecture, not to be confused with 'contemporary architecture', is a term given to a number of building styles with similar characteristics, primarily the simplification of form and the elimination of ornament. While the style was conceived early in the 20th century and heavily promoted by a few architects, architectural educators and exhibits, very few Modern buildings were built in the first half of the century. For three decades after the Second World War, however, it became the dominant architectural style for institutional and corporate building.1. Origins Some historians see the evolution of Modern architecture as a social matter, closely tied to the project of Modernity and hence to the Enlightenment, a result of social and political revolutions.Others see Modern architecture as primarily driven by technological and engineering developments, and it is true that the availability of new building materials such as iron, steel, concrete and glass drove the invention of new building techniques as part of the Industrial Revolution. In 1796, Shrewsbury mill owner Charles Bage first used his 'fireproof' design, which relied on cast iron and brick with flag stone floors. Such construction greatly strengthened the structure of mills, which enabled them to accommodate much bigger machines. Due to poor knowledge of iron's properties as a construction material, a number of early mills collapsed. It was not until the early 1830s that Eaton Hodgkinson introduced the section beam, leading to widespread use of iron construction, this kind of austere industrial architecture utterly transformed the landscape of northern Britain, leading to the description, "Dark satanic mills" of places like Manchester and parts of West Yorkshire. The Crystal Palace by Joseph Paxton at the Great Exhibition of 1851 was an early example of iron and glass construction; possibly the best example is the development of the tall steel skyscraper in Chicago around 1890 by William Le Baron Jenney and Louis Sullivan. Early structures to employ concrete as the chief means of architectural expression (rather than for purely utilitarian structure) include Frank Lloyd Wright's Unity Temple, built in 1906 near Chicago, and Rudolf Steiner's Second Goetheanum, built from 1926 near Basel, Switzerland.Other historians regard Modernism as a matter of taste, a reaction against eclecticism and the lavish stylistic excesses of Victorian Era and Edwardian Art Nouveau.Whatever the cause, around 1900 a number of architects around the world began developing new architectural solutions to integrate traditional precedents (Gothic, for instance) with new technological possibilities. The work of Louis Sullivan and Frank Lloyd Wright in Chicago, Victor Horta in Brussels, Antoni Gaudi in Barcelona, Otto Wagner in Vienna and Charles Rennie Mackintosh in Glasgow, among many others, can be seen as a common struggle between old and new.2. Modernism as Dominant Style By the 1920s the most important figures in Modern architecture had established their reputations. The big three are commonly recognized as Le Corbusier in France, and Ludwig Mies van der Rohe and Walter Gropius in Germany. Mies van der Rohe and Gropius were both directors of the Bauhaus, one of a number of European schools and associations concerned with reconciling craft tradition and industrial technology.Frank Lloyd Wright's career parallels and influences the work of the European modernists, particularly via the Wasmuth Portfolio, but he refused to be categorized with them. Wright was a major influence on both Gropius and van der Rohe, however, as well as on the whole of organic architecture.In 1932 came the important MOMA exhibition, the International Exhibition of Modern Architecture, curated by Philip Johnson. Johnson and collaborator Henry-Russell Hitchcock drew together many distinct threads and trends, identified them as stylistically similar and having a common purpose, and consolidated them into the International Style.This was an important turning point. With World War II the important figures of the Bauhaus fled to the United States, to Chicago, to the Harvard Graduate School of Design, and to Black Mountain College. While Modern architectural design never became a dominant style in single-dwelling residential buildings, in institutional and commercial architecture Modernism became the pre-eminent, and in the schools (for leaders of the profession) the only acceptable, design solution from about 1932 to about 1984.Architects who worked in the international style wanted to break with 。
4.求一篇建筑招投标类外文文献,毕业设计外文翻译用
2. Engelhardt,Gary V.“House Price and Home Owner Saving Behavior”. Regional Science and Urban Economics,26,1996.pp.313-336.
3. Engelhardt,Gary V.“House Price and The Decision to Save for Down Payments.” Journal of Urban Economics,36,1994.pp.209-237.
4. Karl E. Case ,John M. Quigley, Robert J. Shiller. “Comparing Wealth Effects: The Stock Market versus The Housing Market”. University of California,Berkeley. 2003, SepTEMber, pp.1-15.
5. Levin,Laurence.“Are Assets Fungible? Testing the Behavioral Theory of Life-Cycle Savings”.Journal of Economic Organization and Ehavior, 36,1998.pp.59-83.
6. Milton. Friedman.“ A Theory of The Consumption Function. Princeton University Press, PrinCETon”.1957.
7. Nikola,Dvornak and Marion Kohler.“Housing Wealth ,Stock Market Wealth and Consumption : A Panel Analysis for Australia”.Reserch Discussion Paper ,Jul.2003。
8. Starr-McCluer,Martha.“The Stock Market Wealth and Consumer Spending”.Mimeo, Federal Reserve Board of Governors,1999.
9. Skinner, Jonathan.“Housing Wealth and AgGREgate Saving”.Regional Science and Urban Economics,19,1999.pp.307-324.
10. Yoshikawa,Hiroshi and Fumio Ohtake.“Female Labor Supply,Housing Demand ,and The Saving Rate in Japan”.European Economic Review,33,1989.pp.997-1030.
5.建筑外文文献翻译
The road by two highway design, pavement structure type is stable layer of cement powder and the concrete surface layer, as the two lanes, road width of 8 meters, on both sides of the sidewalk width 3.5M, green bandwidth 1.5M; life span of 20 years, the limited speed of 30KM / h, sewer contractors for the concrete mix design catheterization and drainage channels, flood peak values in case of a 50-year design。
6.求一篇土木工程英文文献翻译,毕业设计用的
刚好我也在做毕业设计 把我的给你用吧 Traditional Construction Procedures As mentioned before, construction under the traditional construction procedure is performed by contractors. While they would like to satisfy the owner and the building designers, contractors have the main objective of making a profit. Hence, their initial task is to prepare a bid price based on an accurate estimate of construction costs. This requires development of a concept for performance of the work and a construction time schedule. After a contract has been awarded, contractors must furnish and pay for all materials, equipment, power, labor, and supervision required for construction. The owner compensates the contractors for construction costs and services. A general contractor assumes overall responsibility for construction of a building. The contractor engages subcontractors who take responsibility for the work of the various trades required for construction. For example, a plumbing contractor installs the plumbing, an electrical contractor installs the electrical system, and an elevator contractor installs elevators. Their contracts are with the general contractor, and they are paid by the general contractor. Sometimes, in addition to a general contractor, the owner contracts separately with specialty contractors, such as electrical and mechanical contractors, who perform a substantial amount of the work require for a building. Such contractors are called prime contractors. Their work is scheduled and coordinated by the general contractor, but they are paid directly by the owner. Sometimes also, the owner may use the design-build method and award a contract to an organization for both the design and construction of a building. Such organizations are called design-build contractors. One variation of this type of contract is employed by developers of groups of one-family homes or low-rise apartment buildings. The homebuilder designs and constructs the dwellings, but the design is substantially completed before owners purchase the homes. Administration of the construction procedure often is difficult. Consequently, some owners seek assistance from an expert, called a professional construction manager, with extensive construction experience, who receives a fee. The construction manager negotiates with general contractors and helps select one to construct the building. Managers usually also supervise selection of subcontractors. During construction, they help control costs, expedite equipment and material deliveries, and keep the work on schedule. In some cases, instead, the owner may prefer o engage a construction program manager, to assist in administrating both design and construction. Construction contractors employ labor that may or may not be unionized. Unionized craftspeople are members of unions that are organized by construction trades, such as carpenter, plumber, and electrician unions, Union members will perform only the work assigned to their trade. During construction, all work should be inspected. For this purpose, the owner, often through the architect and consultants, engages inspectors. The field inspectors may be placed under the control of an owner's representative, who may be titled clerk of the works, architect's superintendent, engineer's superintendent, or resident engineer. The inspectors have the responsibility of ensuring that construction meets the requirements of the contract documents and is performed under safe conditions. Such inspections may be made at frequent intervals. In addition, inspections also are made by representatives of one or more governmental agencies. They have the responsibility of ensuring that construction meets legal requirements and have little or no concern with detailed conformance with the contract documents. Such legal inspections are made periodically or at the end of certain stages of construction. One agency that will make frequent inspections is the local or state building department, whichever has jurisdiction. The purpose of these inspections is to ensure conformance with the local or state building code. Following is a description of the basic traditional construction procedure for a multistory building. After the award of a construction contract to a general contractor, the owner may ask the contractor to start a portion of the work before signing of the contract by giving the contractor a letter of intent or after signing of the contract by issuing a written notice to proceed. The contractor then obtains construction permits, as required, form governmental agencies, such as the local building, water, sewer, and highway dep。
7.急求一篇 建筑或景观设计类外文文献及中文翻译
1. Preface Landscape design is an integral part of urban design, but also the face of a city, one of the decisive factors. Landscape design is quite extensive, including a deal with the city space, the use of the characteristics of the original site, and contact between the surrounding environment, plaza, pedestrian street layout, street short as well as settings such as municipal facilities, both with regard to function, it also involves the visual and psychological problems. The concept of traditional landscape design to green-oriented, with the city's modernization and the urban population of the substantial increase in the functional requirements of the landscape is becoming more prominent, at the same time also called for a more aesthetic enrichment and diversification of town so large-scale use of hard landscape, in order to effectively solve the problem. Article in the city constitute a hard on the basic elements of landscape, such as paving, steps, sculpture pieces and so on, through a detailed theoretical introduction, description of specific characteristics of these elements, the use of, and constitute the role of the urban landscape, image, vivid rich and instructive reference for now to carry out large-scale construction of the city has a positive meaning. 2. The constituent elements of the urban landscape 2.1 SURFACES Natural environment from the ground, in the city the ground is always the need to do deal with rigid pavement. In addition to meet the required high-frequency, high-intensity use of functions, but also because the pavement is the creation of a city, one of the basic elements of landscape. Through the use of different pavement materials, can be divided into different uses of the ground to define the different characteristics of the space, you can identify the way forward, suggesting that the speed and rhythm of tour, at the same time through the pavement design changes, but also to create visual interest, constitute a space personality. Designed to do the ground pavement at the time, need to consider the following factors: First of all, should be guided by the principle of a unified whole. Whether it is the choice of pavement materials, pavement design, or design, and other landscape elements should be considered simultaneously in order to ensure that the pavement on the ground in terms of vision or function have been unified into a whole. Change random pavement materials and designs, will only add to the chaotic sense of space, so a specific purpose in the absence of circumstances, can not transform the pavement adjacent to the form of materials and color. The second is security. Function should ensure that pavement strength requirements necessary to ensure surfacing both in dry or wet conditions are the same anti-skid and avoid the risk of pedestrian happen. The third is the appearance, including color, scale and texture. Colors do not want to do is bore neither bleak nor clear to the tacky. Change the color or texture, as long as the function to reflect the difference can be used at. Scale considerations will affect the choice of color and texture, as well as the design of拼缝. Road block size, color and texture and so on, and the venue should have the right relationship between scale, which is an important point. A lot of ground surfacing materials, primarily asphalt, concrete, tile, natural stone, gravel, etc., can be made in accordance with the requirements of the different selection. Asphalt surface and low cost, easy construction, commonly used in the driveway, sidewalks, road pavement parking. Color of the use of asphalt pavement can also change the monotony of the landscape. Concrete pavement due to its low cost and applicability of a strong and widely used. Cast-in-place concrete paving settings attention should be paid to expansion joints, and concrete block pavement is more flexible. The colorful tile surface, pattern and shape of the degree of freedom, and easy to create a cheerful, gorgeous atmosphere. Commonly used in public facilities in the entrance plaza, walkways, shopping malls and other places of the road pavement. Natural stone materials, especially granite paving, can often create a solemn, calm atmosphere, most important for the city lots. In order to avoid large-scale rigid pavement caused by environmental problems, at the possible conditions, can also be combined with green, forming grass pavement inlay. 2.2 level, and curb ramp Space in urban environment, natural causes or because of the various functions required, usually to change the floor height changes, and changes in floor height also tend to produce a rich and beautiful landscape of the 。
8.求两篇土木工程的外文文献,最好关于施工组织设计或管理的,每篇翻
毕业设计论文施工组织设计文献综述 施工组织设计的作用是对拟建工程施工的全过程实行科学的管理的重要手段。
通过施工组织设计的编制，可以全面考虑拟建工程的各种施工条件，扬长避短，拟定合理的施工方案，确定施工顺序、施工方法、劳动组织和技术经济的组织措施，合理地统筹安排拟定施工进度计划，保证拟建工程按期投产或交付使用；也为拟建工程的设计方案在经济上的合理性，在技术上的科学性和实施工程上的可能性进行论证提供依据；还为建设单位编制基本建设计划和施工企业编制施工计划提供依据。施工企业可以提前掌握人力、材料和机具使用上的先后顺序，全面安排资源的供应与消耗；可以合理确定临时设施的数量、规模和用途；以及临时设施、材料和机具在施工场地上的布置方案。
如果施工组织设计编制的合理，能正确反映客观实际，符合建设单位和设计单位的要求，并且在施工过程中认真地贯彻执行，就可以保证工程的顺利进行，取得好、快、省和安全的效果，早日发挥基本建设投资的经济效益和社会效益。 60年代我们的施工组织措施采用的苏联的管理模式，随着我国的经济的增长，我们建筑业的发展，我们的施工项目管理也不断的更科学，70到80年代施工组织设计在我国全面的推广，经过我们不断的实践、探索、研究，使之我们现在的施工组织更科学更协调，经济上更合理 以往我们强调工程开工前必须有施工组织设计，否则不得开工，但有相当多的工程虽然编制了施工组织设计，但实际执行却不如人意，甚至有的根本无法实施。
许多年来，施工组织设计的编制往往是由个别人编写，在很大程度上造成与材料、机械、劳动力等部门的脱节，使施工组织设计开始就先天不足，到项目实施过程中，由于编制者与实施者的分离，无法起到指导作用的施工组织设计只能束之高阁。所以我们认识了不足之处对于实施方案的编制组织，现在我们采取各部门共同参与的方法，并由项目技术负责人主编，使施工组织设计真正起到指导工程施工的作用。
施工部署由单1转向了全面统筹工程的后续开展更顺利。 正 文 杨太生.《地基与基础》.-北京：中国建筑工业出版社，2004. 本书内容是根据本课程的教学基本要求并按照国家颁布的有关设计新规范、新标准编写的。
全书共分十章，包括土的物理性质及工程分类，地基中的应力计算，土的压缩性与地基沉降计算，土的抗剪强度与地基承载力，土压力与土坡稳定，建筑场地的工程地质勘察，天然地基上浅基础设计，桩基础设计，地基处理，区域性地基等内容。本书可作为土建学科高等职业学校、高等专科学校建筑工程专业及相关专业的教学用书，也可作为相关工程技术人员的参考书。
徐 蓉.《工程造价管理》. 上海：同济大学出版社，2005 本书以贯彻国家法规、规范为指导思想，从基础理论和实践应用人手，主要介绍 工程造价管理的相关理论和计算评价方法。本书共9章：第一章介绍工程造价概论， 解释了价格、造价的基本概念；第二章介绍工程造价的组成和计价方法，及工程量清 单计价规范的有关内容；第三章至第七章分别介绍了工程项目决策、设计、招标投标、施工和竣工决算等不同阶段中，建设过程中工程造价确定和管理的实际操作内容；第八、九章介绍工程财务和工程造价管理相关法规的内容，这是作为从事工程造价管理工作的工程师们所必需掌握的基本知识。
尹怡林.《建筑工程计量与计价》. 天津：天津大学出版社，2003,5. 本书针对建设工程清单时期广大预算人员的学习需要，介绍了建筑工程预算书的编制内容和步骤，全面叙述了消耗量定额与清单计价的定额说明及工程量计算规则，重点阐述了应用例题的详细解答与完整的建筑工程的消耗量定额预算书和工程量清单投标报价书。内容共分三部分，包括：绪论，上篇——建筑工程消耗量定额计量与计价，下篇——建筑工程工程量清单计量与计价。
本书逻辑清晰，图文并茂，强调理论与实践的关联，充分结合施工组织的实际，辅以大量实例，注重例题的合理化，支持启发性与交互式教学，力求实用。 本书与《建设工程计价依据与方法》配套使用，学习过程中需配备参考文献所列书籍。
本书可作为高职高专院校建筑类专业的选用教材，也可作为建筑企业管理培训教材，还可作为企事业单位中高层管理人员与技术人员的参考用书。 姚刚.土木工程施工技术.北京：人民交通出版社，2005,3 土木工程施工是土木工程专业的一门主干课。
其主要任务是研究土木工程施工技术和施工组织的一般规律；土木工程中主要工种工程施工方法和工艺原理；施工项目科学的组织原理以及土木工程施工中的新技术、新材料、新工艺的发展和应用。新的《土木工程施工》教材阐述了土木工程施工的基本理论及其工程应用，在内容上力求符合国家现行规范、标准的要求，反映现代土木工程施工的新技术、新工艺及其新成就，以满足新时期人才培养的需要；在知识点的取舍上，保留了一些常用的传统工艺方法，注重纳入对工程建设有重大影响的新技术，突出综合运用土木工程施工及其相关学科的基本理论和知识，以解决工。
转载请注明出处众文网 » 建筑毕业论文外文参考文献(建筑论文外文参考文献)