众文网1.求一篇自动化方面英文文章带中文翻译的3000千字
The main advantage of this concept is that the consecutive controller is able to control disturbances of humidifying arrangement directly, because the dew point measurement of the humidifier has got a very short response time compared with the quite longer response time of the furnace dew point. This is caused by bigger time delays of the measurement and the delay time of the process gas to come into the furnace. Analysis station for CO/CO2, H2 and O2ppm monitoring, extracting method will be multiplexed sampling An analysis station designed as a complete functional unit will be used for monitoring the composition of the atmosphere in the Furnace. The analysis station will be a single-cabinet unit complete with analyzers, pumps, solenoid valves and control unit. In normal operation, the sample gas switchover system will switch cyclically between the different sample gases. The system can also be switched to nitrogen for purging or to a calibration gas; this is not part of the normal cycle. The sample waste gas will be fed from the sampling probe on the furnace (with filter) to the analyser or sample gas treatment system through a sample gas line routed downwards. Sample gas from each sample gas point will be extracted by the main sample gas pump to the analyser station. The sample gas 'in measurement' will be switched to the measurement line from where an additional pump pumps it to the analysers. The sample gas lines will be made from acid-resistant plastic. The multiplexing analysis system has following probes: For CO/CO2 the system in an actual mode can be calibrated automatically every day using an in-built comparison probe. The calibration time is triggered using an internal period value, which can be changed manually. During calibration time no measurement values are available. A particular feature will be to switch from multiplexing measuring mode to single mode, where a certain probe gas inlet can be measured continuously and vice versa. 这一进程所提供的气体，搅拌站在预热时将用换热器。
天然气将在一个封闭的循环进行温度对照。预热H2/N2分配给不同的加湿器系统。
在加湿器的过程中，天然气将利用富含水蒸汽的需要，在暖气炉中创造一个稳定的露点。在炉中，露点将成为衡量的加湿器。
这两种测量将用于控制级联控制电路中所描述的下一章。 下面的示意图显示了控制概念的一个区的脱碳炉。
为了获得非常高的质量控制级联控制电路使用，凡有主控制器采用实际露点值精度高，手中的设置点的连续控制器作为输出。 这种控制器调整1露点的进程直接测量气体的出口加湿器。
它的主要优势是，这一概念 连续控制器能够控制骚乱直接加湿的安排，因为露点测量加湿器得到了很短的响应时间与反应时间而且很长的炉露点。这是造成更多的时间从而延迟测量和延迟气体进入炉的时间进程。
分析站CO/CO2 , H2和O2ppm监测， 提取方法将采样： 分析站设计作为一个完整的功能单位将用于组成气氛炉中进行监测。 分析站将是一个单一完整的内阁单位与分析仪，水泵，电磁阀和控制单元。
在正常操作时，样品气体切换系统将切换周期性不同样本之间的气体。该系统还可以切换到氮清洗或校准气体，这是不正常的周期。
抽样废气将美联储从取样探头的炉（带过滤器）的分析仪或样品气体处理系统通过抽样天然气管线路由向下。样品气体从每个样品天然气将是主要的提取汽油样品的分析仪站。
样本气体测量中'将切换到测量线从那里额外泵泵给分析器。抽样天然气管道将来自耐酸塑料。
在复分析系统具有以下探针： 为CO/CO2该系统在实际模式可自动校准，每天使用的是内置的比较调查。校准时间是引发内部期间使用的价值，可手动改变。
在校准时没有测量值。 一个特别的功能将被转换复测模式，以单一的模式，在一定的探测气体入口可以连续测量，反之亦然。
这一进程所提供的气体搅拌站将预热用换热器。温度对照的天然气将在一个封闭的循环。
预热H2/N2分配给不同的加湿器系统。在加湿器的过程天然气将富含水蒸汽的需要，以创造一个稳定的露点在炉。
露点将成为衡量的加湿器，并在炉。这两种测量将用于控制级联控制电路中所描述的下一章。
下面的示意图显示了控制概念的一个区的脱碳炉。 为了获得非常高的质量控制级联控制电路使用，凡有主控制器采用实际露点值精度高，手中的设置点的连续控制器作为输出。
这种控制器调整1露点的进程直接测量气体的出口加湿器。 的主要优势是，这一概念 连续控制器能够控制骚乱的直接加湿的安排，因为露点测量加湿器得到了很短的响应时间与反应时间很长的炉露点。
这是造成更大的时间延迟的测量和延迟时间的进程气体进入炉。 分析站CO/CO2 , H2和O2ppm监测， 提取方法将复采样 分析站设计作为一个完整的功能单位将用于监测的组成气氛炉。
分析站将是一个单一完整的内阁单位与分析仪，水泵，电磁阀和控制单元。在正常操作。
2.自动化论文摘要英文翻译,请帮我修改一下
Abstract: This article introduces the AT89C51 MCU-based single-color LED display control characters show the basic principles of the hardware and software and systems design. First outlined the LED display profile and development, and the ranks of LED display module driver made a brief description of principles followed by emphasis on analysis and design of a microcontroller control system hardware and related devices, explained the principle; Final completion of the system's display drivers, the system main program, and list some of the source. The results showed that the system can achieve sub-screen display and scanning the left scan showed that the effect of, and a serial data input, parallel and synchronized clock output data for the circuit can greatly reduce the input and output MCU I / O of the occupation, increase data transmission Rate.
Key words: LED MCU MCU scan display driver
3.求一篇自动化有关的英文文献及翻译
机器或装置在无人干预的情况下按规定的程序或指令自动进行操作或控制的过程，其目标是“稳，准，快”。自动化技术广泛用于工业、农业、军事、科学研究、交通运输、商业、医疗、服务和家庭等方面。采用自动化技术不仅可以把人从繁重的体力劳动、部分脑力劳动以及恶劣、危险的工作环境中解放出来，而且能扩展人的器官功能，极大地提高劳动生产率，增强人类认识世界和改造世界的能力。因此，自动化是工业、农业、国防和科学技术现代化的重要条件和显著标志。
Machine or device in the absence of intervention procedures or instructions required automatic operation or control of the process and its goal is \u0026quot;steady, accurate and fast.\u0026quot; Automation technology is widely used in industry, agriculture, military, scientific research, transportation, business, health, services, and family and so on. The use of automation technology not only to take people from the heavy manual labor, some mental and poor and dangerous working conditions of liberation, but also to expand people\u0026#39;s organ function, significantly raising labor productivity, enhance human understanding of the world and the ability to change the world . Therefore, the automation industry, agriculture, national defense and modernization of science and technology
4.求电气自动化专业英汉互译资料,5000字英文
您好，问题已收到。
可能没五千个啦。Control theory and electricity grids theory is the electrical engineering and automation major foundation, the power electronic technology, computer technology is its main technical means, also contains a systems analysis, system design, system development and system management and decision-making, etc research field.The professional and some feature that weak electricity combining, electrical and electronic technology to combine together, software and hardware, combining with interdisciplinary nature, electric power, electronics, control, computer multi-discipline, give graduates have strong adaptability, is "the broad caliber" professional.Electrical engineering and automation to the examinee has a strong attraction, belongs to the popular major, the university entrance exam to admit fractional line often than other professional direction high, killing this lot are the main reasons: (1) the employment easy, working environment is good, the high income;(2) the name of students listen, professional content attractive; Social propaganda and public opinion guide to its advantage.The professional direction has a very good prospects for development, the research results easier to reality and product shifts, with considerable benefits.His creative thinking attracts many examinee, here is really good place to display their talent.But given the form of domestic now, examinee in enter oneself for an examination the professional when should pay attention to the following two points:(1) fully consider their interests.Maybe he could not for the sense of direction interested, but many people say, so oneself "interest".The following development is very harmful. After all, the interest is the best teacher.(2) measure their comprehensive quality.Electrical engineering and automation need strong knowledge of mathematics, physics foundation, strong language comprehensive ability, can grasp and flexible for future use professional knowledge for preparation.The professional direction of the personnel needs, but although large selection of many people, if not very strong comprehensive quality, it is difficult to get out in the crowd, outstanding achievements.Perhaps this for many bosom the examinee of lofty ambition it is unacceptable.Of course, here said the two also and whether it is feasible to the pursuit of individual students about, if a person is limited to pursuit a better job, this major is a good choice.But, if want to make breakthrough technology innovation or based on personal contribution strength as well as hard work, on the basis of the pie is never unprovoked fell from the sky.Because this major research scope, the application prospect of professional quality, graduates are relatively high, therefore employment situation very well.Our country is very need the professional direction of the talent, small to a family, to the whole society, are inseparable from these professional work.Normally, students can choose state-owned quality technical supervision department, research institute, industrial mining enterprises etc; Can also be some foreign investment, private enterprise, treatment of course is considerable.If it is strong enough, and students' ability in during study accumulated better research achievements, can completely his business, rush piece of the sky belongs.It should be pointed out that, because in the professional direction of the overseas research, so bringing preceded us if they want to have further development, establish themselves in the leading position in domestic this direction, to go abroad for further study is a good choice.希望帮到你哦！ 仅此建议，希望采纳。
5.自动化论文摘要翻译成英文,在线等
A new design of infrared wireless alarm system. This paper designs a new type of multi-function wireless burglar alarm system, including both hardware and software parts. Hardware includes single chip control circuit, infrared sensor circuit, driving the implementation of the alarm circuit, led control circuit and other components. Some parts of the software, including signal acquisition, alarm parts, interrupted part. Processor with 51 series at89c51, the whole system is under the control of the system software to work. It is a non-contact form of infrared radiation detected in the human body and its transformation into a voltage signal at the same time, it can identify the biological and other non-sports。
6.求一牛人帮我用英文翻译下面一段毕业论文摘要
Summary
Today for any business to streamline, automate, and flexibility are vital factors, each operation is to rationalize and to control, and advanced logistics and automation system to address the needs of enterprises, which are the enterprise in a competitive advantage in the decisive factor.
The development of modern industry trends is informational, automation, networked, intelligent, flexible, particularly in China has joined the WTO, the development of modern science and technology and global economic integration, this requires the development of China's industrial automation, and should always closely follow the world industrial automation technology developments, take advantage of the advanced technology of China's traditional industries to improve productivity, and enhance the international competitiveness of the market, to speed up the pace of industrial modernization.
With the development of modern industrial production, automation and control technology integration application is playing an increasingly important role. Due to the pneumatic, hydraulic technology, sensor technology, PLC technology, network and communication technologies, and other subjects of strong mutual infiltration of Mechatronics, has become an important part of industrial science and technology.
Key words: PLC MPS sensor electric auto production line
已翻译 可以作为满意答案吧
7.急求一下自动化专业课英文翻译
电路理论 Theory of Circuitry
自动控制原理 Principles of Automatic Control
MATLAB程序设计及应用 Design and application of MATLAB procedure
电机与拖动 Electrical Machinery and Towage
自动控制系统 Automatic Control System
电力拖动自动控制系统 Electric Drive Automatic Control System
电力电子技术 Power and Electron Technology
计算机控制技术 Computer Control Technology
现代控制理论 Modern Control Theory
工厂供电 Factory Electricity Supply
传感器原理及应用 Fundamentals and Application of Sensors
轮机自动化 Marine machinery Automation
船舶电气 Marine Electric
过程控制系统 Process Control System
交流电机控制技术 AC Electromotor Control Technology
电器与PLC控制技术 Electric Appliances and PLC Control Technology
搞定，查阅机械英语翻译，请验收
8.急求一篇有关办公自动化系统方面的英文论文加翻译,字数3000字左右
办公自动化系统是人机信息系统，是办公自动化技术与管理科学、行为科学、组织理论等相融合，贯穿到办公活动的各个方面，并对这些方面产生一系列影响之后形成的系统，其目的是尽可能充分利用信息资源，提高办公质量和办公效率。
办公自动化系统是一种人机信息系统，具有一般信息系统的共性。同时，由于办公过程和办公活动具不有确定性，人在系统中应始终处于主导地位。办公的主体是办公人员，设备只是服务于人的技术手段。建立办公自动化系统后，人的办公活动和社会组织的办公过程已离不开设备的运行，而是与其结合在一起形成一个统一的系统。建立办公自动化系统的目的并不单纯是提高办公效率或减少办公人员，而首先是为了提高办公质量，在提高办公质量和办公效率的基础上，通过各种决策模型及时提供辅助决策的信息，以实现科学管理和科学决策。此外，办公自动化系统是一个开放式的系统。在设计和建立系统时，应充分考虑和社会环境的连接。
办公自动化系统的功能与办公室自动化的功能概念上存在差别。办公室自动化功能通常指办公室中配备具有自动化功能的设备，这些设备能使某些办公活动自动化或实现某个单位业务的自动化处理；而办公自动化系统则是在办公室自动化功能的基础上发展起来，以办公自动化技术为主体，同人、组织、制度、环境等相结合的完整的系统。