众文网1.跪求一篇电气专业的英文翻译（最好中英都有的） 是毕业设计的外文翻
电气毕业设计目录0018031单片机实现电阻炉温度的控制
002IC卡
003PLC温度控制系统
004RTX-51
005玻璃退火
006测温系统以数据采集系统
007车高控制传感器
008车辆定位追踪系统
009车载摇控无线打卡器
010大功率激光二极管的精密恒温制冷系统
011单片机控制制冷机来达到控制温度
012单片机实现的步进电机通用控制器
013单片机实现电阻炉温度的控制
014滴数计算方法确定
015电动机的调速控制
016电热恒温箱
017电渣重熔炉工艺
018电阻炉
019电阻炉温度控制系统
020多点温度检测控制仪
021多功能出租车计价器
022多控点温度检测仪
023多效蒸馏水机控制系统的研究与实现
024反馈控制
025废水处理微机控制系统
026负荷控制
027附加于普通模拟示波器的多功能智能装置
028工业废水工业处理
029工业自动小车位置检测及控制
030锅炉汽包水位
031锅炉汽包水位的测量、控制和保护系统
032函数发生器
033航空发动机
034航空发动机电气部分设计
035红外物质水分测量仪
036环境监测系统
037机车电线路检测是一
038基于计算机的测试仪器
039加球机
040家庭及住宅小区智能化
041家庭自动化
042胶订包本机 es strong enough to immobilize the cells in the aggregate, enabling the ac electric field to be released, and the iso-osmotic buffer to be replaced by growth or other media. Cell viability is maintained. The new method of immobilization significantly simplifies the construction of aggregates of animal cells by dielectrophoresis, and increases the utility of dielectrophoresis in tissue engineering and related areas. Biotechnol. Bioeng. 2007;98: 694–700. 2007 Wiley Periodicals, Inc. KEYWORDS: tissue engineering; dielectrophoresis; 3D culture; immobilization; adhesion 你好，我有相关论文资料，需要的话请加我QQ，我发给你，497267666，谢谢。
3.电气专业的论文设计翻译
This design based on the actual production, the best operation in substation based system illustrates the basic methods and design of substation by steps, calibration, is to meet the actual production needs a set of optimal design. This design content involves the distribution of introduction, Electricity load calculation and the choice of transformer, The main electrical wiring, short circuit calculation and design of electric equipment of substation and calibration (including breaker, isolating switch, current transformer, busbar voltage transformer, etc), relay protection and substation configuration of the lightning protection, etc. Chapters in writing and large respectively, combined with practical parameters are calculated and drawing part is more intuitive to reflect and form design content.
Keywords: the main transformer, The wiring schemes, Short-circuit current calculation, Electrical equipment,
4.急求
s equipment operations, it also creates convenience to the aspects of daily inspection,check and protection etcThe application of substation installation of microprocessor-based protectionABSTRACT:By comparison,the installation of substation microprocessor-based protection has many advantages over the conventional electric relay-based protection.Key words, it is the foundation for the development of synthetical automation of the future.The application of microprocessor-based protection has laid down an excellent foundation for the safety and stability of substation'。
5.求电气毕业论文摘要翻译
The graduation design based on the design plan descriptions of the construction of national economy and policy, the policy, technology, combined with the actual engineering prescribed line, ensure reliable power supply, scheduling, meet the technical requirements for flexible.
On the analysis of the original material, on the basis of 110 kv substations electrical design project of the connection mode of operation are analyzed, 110 kv substations is elected meet safe, reliable quality, and the economic operation of the requirements of 110 kv substations wiring way as the normal operation and auto-switch manner. For the main electrical wiring, short-circuit current calculation, to reasonably select the electrical equipment. Finally, according to the first part of the wiring and requirements of the relay protection, substation configuration, in order to ensure the safe and economic operation, prevent accidents or expansion, the safe and economic operation. Integrated substation automation are the second equipment (including substation measuring instruments, signal system, relay protection and remote device and automatic device etc) through the combination of function and the optimization design, the use of advanced computer technology, modern electronic technology, the communication technology and the signal processing technology, the main equipment of the transformer substation, power distribution lines and automatic monitoring and measurement, automatic control and microcomputer protection, and scheduling communication etc comprehensive automation function.
Keywords:
Substation, The main electrical wiring, Transformer, Circuit breaker, Isolating switch, Bus, Short-circuit current, Relay protection, Control and information.
6.毕业论文外文翻译是什么意思
毕业论文外文翻译：将外文参考文献翻译成中文版本。
翻译要求：
1、选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。
2、选择外文翻译时一定选择外国作者写的文章，可从学校中知网或者外文数据库下载。
3、外文翻译字数要求3000字以上，从外文文章起始处开始翻译，不允许从文章中间部分开始翻译，翻译必须结束于文章的一个大段落。
参考文献是在学术研究过程中，对某一著作或论文的整体的参考或借鉴.征引过的文献在注释中已注明，不再出现于文后参考文献中。外文参考文献就是指论文是引用的文献原文是国外的，并非中国的。
原文就是指原作品，原件，即作者所写作品所用的语言。如莎士比亚的《罗密欧与朱丽叶》原文是英语。 译文就是翻译过来的文字，如在中国也可以找到莎士比亚《罗密欧与朱丽叶》的中文版本，这个中文版本就称为译文 。
扩展资料：
外文翻译需要注意的问题
1、外文文献的出处不要翻译成中文，且写在中文译文的右上角（不是放在页眉处）；会议要求：名称、地点、年份、卷（期），等 。
2、作者姓名以及作者的工作单位也不用必须翻译。
3、abstract翻译成“摘要”，不要翻译成“文章摘要”等其他词语。
4、Key words翻译成“关键词” 。
5、introduction 翻译成“引言”（不是导言）。
6、各节的标号I、II等可以直接使用，不要再翻译成“第一部分”“第二部分”，等。
7、注意排版格式，都是单排版，行距1.25，字号小4号，等（按照格式要求）。
8、里面的图可以拷贝粘贴，但要将图标、横纵指标的英文标注翻译成中文。
9、里面的公式、表不可以拷贝粘贴，要自己重新录入、重新画表格。
7.求电气毕业论文摘要翻译
The graduation design based on the design plan descriptions of the construction of national economy and policy, the policy, technology, combined with the actual engineering prescribed line, ensure reliable power supply, scheduling, meet the technical requirements for flexible.On the analysis of the original material, on the basis of 110 kv substations electrical design project of the connection mode of operation are analyzed, 110 kv substations is elected meet safe, reliable quality, and the economic operation of the requirements of 110 kv substations wiring way as the normal operation and auto-switch manner. For the main electrical wiring, short-circuit current calculation, to reasonably select the electrical equipment. Finally, according to the first part of the wiring and requirements of the relay protection, substation configuration, in order to ensure the safe and economic operation, prevent accidents or expansion, the safe and economic operation. Integrated substation automation are the second equipment (including substation measuring instruments, signal system, relay protection and remote device and automatic device etc) through the combination of function and the optimization design, the use of advanced computer technology, modern electronic technology, the communication technology and the signal processing technology, the main equipment of the transformer substation, power distribution lines and automatic monitoring and measurement, automatic control and microcomputer protection, and scheduling communication etc comprehensive automation function.Keywords:Substation, The main electrical wiring, Transformer, Circuit breaker, Isolating switch, Bus, Short-circuit current, Relay protection, Control and information.。
转载请注明出处众文网 » 电气专业毕业论文的外文翻译