旋转时钟的毕业论文开题报告(led旋转时钟需要什么材料)

1.led旋转时钟需要什么材料

电阻 200 16个

电阻 1K 1个

电阻 2K 1个

电阻 10K 1个

排阻 1个

瓷片电容 30pF 2个

瓷片电容 104 2个

电解电容 10uF 1个

电解电容 1000uF 1个

电解电容 470uF 1个

发光二极管（贴片） LED 16个

二极管（NPN） In4007 4个

稳压管 7806 1个

霍尔传感器（开关） Ah3144 1个

单片机 STC89C52RC 1个

时钟芯片 DS1302 1个

普通开关 2个

复位开关 1个

晶振 12MHz 1个

晶振 32.768KHz 1个

万用板 1块

导线 若干

变压器 1个

插头 1根

杜邦头 若干

杜邦线 若干

芯片底座 1个

插针 若干

干电池底座 1个

干电池 1.5V 3节

电池 3V 1个

电池底座 1个

散热片 1个

直流电机 6V 1个

2.各位大哥谁有led旋转时钟的资料啊

lude#define W_U 64#define W_D 32sbit DAT=P1^0;sbit CLK=P1^1;sbit RCK=P1^2;sbit LED_R=P1^6;sbit LED_L=P1^7;sbit KEY1=P3^4;sbit KEY2=P3^5;sbit DSEN=P3^2; int n=0;unsigned char code tab2[]={/*------------------------------------------------------------------------------ 源文件 / 文字 ： 星光灿烂 宽*高（像素）： 64*32 字模格式/大小 ： 单色点阵液晶字模，纵向取模，字节正序/256字节 数据转换日期 ： 2006-10-29 21:17:15------------------------------------------------------------------------------*/0x00,0x00,0x44,0x7F,0x55,0x55,0x55,0x57,0x55,0x55,0x7D,0x01,0x00,0x00,0x00,0x02,0x02,0x12,0x0A,0x03,0x42,0x7E,0x03,0x0A,0x32,0x02,0x02,0x00,0x00,0x0F,0x00,0x7F,0x04,0x08,0x0F,0x00,0x00,0x7F,0x00,0x00,0x1F,0x00,0x00,0x0F,0x00,0x7F,0x04,0x04,0x08,0x78,0x08,0x08,0x38,0x68,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x48,0x88,0x08,0x28,0x28,0x28,0xF8,0x28,0x28,0x28,0x08,0x08,0x00,0x00,0x08,0x08,0x10,0x30,0xC0,0x00,0x00,0xF8,0x08,0x08,0x08,0x10,0x00,0x00,0x08,0x30,0xC0,0x40,0x20,0xF8,0x08,0x10,0xF0,0x10,0x10,0xF8,0x00,0x00,0x08,0x30,0xC0,0x40,0x20,0x90,0x90,0x90,0x90,0x90,0x90,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};unsigned int prictur=0;void delay(unsigned int i){ unsigned int j,k; for(i;i>0;i--) for(j=8;j>0;j--) for(k=20;k>0;k--);}void init_port(){ P1M0=0x00; P1M1=0x00;} void display(){ unsigned long add=0; unsigned char num; unsigned int i; add=n+prictur*256; num=tab2[add]; for(i=0;i<8;i++) { CLK=0; DAT=!(0x80&num); CLK=1; num<<=1; } num=tab2[add+W_U]; for(i=0;i<8;i++) { CLK=0; DAT=!(0x80&num); CLK=1; num<<=1; } num=tab2[add+2*W_U]; for(i=0;i<8;i++) { CLK=0; DAT=!(0x80&num); CLK=1; num<<=1; } num=tab2[add+3*W_U]; for(i=0;i<8;i++) { CLK=0; DAT=!(0x80&num); CLK=1; num<<=1; }RCK=0; RCK=1;}void display_CLR(){ unsigned int i; for(i=0;i<32;i++) { CLK=0; DAT=1; CLK=1; } RCK=0; RCK=1;}void LED(unsigned int n){ unsigned int i; for(i=32-n;i>0;i--) { CLK=0; DAT=1; CLK=1; } for(i=n;i>0;i--) { CLK=0; DAT=0; CLK=1; } RCK=0; RCK=1; delay(250); for(i=0;i<32;i++) { CLK=0; DAT=1; CLK=1; RCK=0; RCK=1; delay(200); }}void main(){ unsigned int w; init_port();n=0;LED_R=0; LED_L=1; while(1) { LED_L=!LED_L; LED_R=!LED_R; if(KEY1==0) { while(!KEY1); prictur++; LED(prictur+1); delay(50); } if(KEY2==0) { while(!KEY1); prictur=0; LED(prictur+1); delay(50); }if(DSEN==0) { delay(200); n=0; for(w=0;w

转载请注明出处众文网 » 旋转时钟的毕业论文开题报告(led旋转时钟需要什么材料)